冷坩埚定向凝固TiAl基合金高温持久性能研究

采用电磁冷坩埚定向凝固技术制备了成分为Ti-47A1-2Cr-2Nb的合金铸锭,定向凝固后的显微组织为α2+γ全片层结构.在0.4～1.2mm/min的抽拉速率范围内,随着抽拉速率的增加,片层间距减小,柱状晶与生长方向的夹角增大.随着温度升高,合金的拉伸强度有所下降,但由于细化片层界面对切变应力变形的阻碍作用,合金的高温拉伸强度会随着抽拉速率的增加而提高.通过对抽拉速率为1.0mm/min试样的拉伸强度与温度的拟合,得到了拉伸强度和温度之间的函数关系.随着抽拉速率的增加,Ti-47A1-2Cr-2Nb合金的持久寿命明显升高,对于抽拉速率为1.2mm/min试样的持久性能测试表明,其持久寿命最长,达到了48h.持久试样的断口形貌表明,其断裂的主要方式是伴随着少量延性断裂的脆性解理断裂.最后根据时间-温度模型,分别采用Larson-Miller和Manson-Haferd参数法建立了定向凝固Ti-47Al-2Cr-2Nb合金的持久强度预测函数模型,预测的理论值与试验结果吻合度较高.     

石英加速度计零件毛刺控制

针对现阶段石英加速度计零件的毛刺问题,分析了现有处理方法的缺陷.从被动去除和主动控制两条途径入手,以轭铁零件为例,在加工中引用了少无毛刺加工技术,并引进了新的去毛刺方法.强度检测结果表明,这两种方法的运用显著改善了毛刺控制的效果,值得推广和运用.     

基于自然激励技术的颤振边界预测

为了预测紊流激励条件下机翼的颤振边界,基于自然激励技术提取紊流响应的自由衰减信号,采用矩阵束方法识别模态参数,最后通过Z-W(Zimmerman-Weissenburger)方法计算稳定性判据,拟合判据变化曲线并外推颤振边界.对平板机翼模型进行了数值仿真分析,对单独机翼模型风洞颤振试验数据进行了计算.结果表明:采用自然激励技术与矩阵束方法能够较准确地识别紊流激励响应的模态参数,频率识别误差小于6％,阻尼比识别误差小于30％,结合Z-W方法能够在较低风速较早地预测颤振边界,有助于提高试验的安全性.     

极低压下两相流挤压油膜阻尼器油膜参数特性

针对极低供油压力工况开展实验研究,以考察气液两相流对挤压油膜阻尼器(SFD)油膜参数特性的影响。结果表明:当SFD入口气体体积分数小于0.9时,油膜阻尼随着入口气体体积分数的增加而减小,直至气体体积分数增大到0.9时,油膜阻尼是纯油状态时阻尼的60%;当气体体积分数大于0.9时,油膜阻尼大幅减小至几乎可以忽略不计。现有理论模型并不适用于极低供油压力工况。基于实验结果,找到了最符合SFD两相流动的等效黏度模型,其理论预测的油膜阻尼与不同供油压力下的实验数据吻合较好,为SFD两相流研究的模型选择提供了依据。     

工程数据库管理系统的探讨

工程数据库管理系统是一个面向CAD/CAM的数据(包括知识)管理系统,它是CAD/CAM软件系统的核心。本文对工程数据库系统在CAD/CAM系统中的地位和作用、工程数据库管理系统的特殊要求以及多级数据管理、多重数据模型、复杂实体的定义和操作、变长域类型及版本化作了一些探讨和建议。     

构建廊坊市政府新型服务管理体系——知识管理

本文试着以廊坊市政府知识管理体系建设为切入点,作为打开市政府知识管理大门的钥匙,在发展完善知识管理理论体系、开拓知识库应用领域的同时,对促进政府适应知识经济发展、向知识型政府转变有一定的启发和指导作用。     

Integration of lessons from recent research for “Earth to Mars” life support systems

Development of reliable and robust strategies for long-term life support for planetary exploration must be built from real-time experimentation to verify and improve system components. Also critical is incorporating a range of viable options to handle potential short-term life system imbalances. This paper revisits some of the conceptual framework for a Mars base prototype which has been developed by the authors along with others previously advanced (“Mars on Earth^®”) in the light of three years of experimentation in the Laboratory Biosphere, further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches. Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls. For example, crops of sweet potatoes exceeded original Mars base prototype projections by an average of 46% (53% for best crop) ultradwarf (Apogee) wheat by 9% (23% for best crop), pinto bean by 13% (31% for best crop). These production levels, although they may be increased with further optimization of lighting regimes, environmental parameters, crop density etc. offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research. But soil also offers distinct advantages: the capability to be created on the Moon or Mars using in situ space resources, reduces long-term reliance on consumables and imported resources, and more readily recycling and incorporating crew and crop waste products. In addition, a living soil contains a complex microbial ecosystem which helps prevent the buildup of trace gases or compounds, and thus assist with air and water purification. The atmospheric dynamics of these crops were studied in the Laboratory Biosphere adding to the database necessary for managing the mixed stands of crops essential for supplying a nutritionally adequate diet in space. This paper explores some of the challenges of small bioregenerative life support: air-sealing and facility architecture/design, balance of short-term variations of carbon dioxide and oxygen through staggered plantings, options for additional atmospheric buffers and sinks, lighting/energy efficiency engineering, crop and waste product recycling approaches, and human factor considerations in the design and operation of a Mars base. An “Earth to Mars” project, forging the ability to live sustainably in space (as on Earth) requires continued research and testing of these components and integrated subsystems; and developing a step-by-step learning process.     

浅议我国个人所得税实施中存在的问题及解决对策

个人所得税在调节个人收入、增加财政收入、维护国家权益等方面发挥了积极作用,但是随着我国经济的发展,在实施个人所得税中也逐渐暴露出一些问题.本文针对这些问题,进行了深刻的分析,并提出了解决的对策.     

超声速条件下多体干扰与分离试验研究

采用根据国外公开文献设计的类CAV模型,在0．6m×0．6m 跨/超声速风洞中开展了多体干扰与分离网格测力试验研究,初步获得了典型多体飞行器分离过程中的气动特性变化规律。试验结果表明,载荷模型气动特性受分离位置变化影响非常明显。载荷模型沿轴向分离时,气动力（矩）逐步接近自由流中气动力（矩）值,载荷模型法向位置改变会引发其气动力（矩）值发生更为剧烈的变化。引发这种现象的原因有两个：一是尾迹和头激波的发展改变了不同轴向位置处载荷模型的表面流态,从而影响了其气动特性;二是母机模型底部流动具有明显的非对称膨胀特征,不同法向位置处流速大小和方向差异明显,导致载荷模型气动特性随法向位置变化更为剧烈。     

高温长期时效对一种镍基单晶合金拉伸和持久性能的影响

研究了高温长期时效对一种镍基单晶合金在室温条件下瞬时拉伸强度和在950℃/240MPa条件下持久性能的影响。结果表明:1000℃短期时效100h,合金室温拉伸强度σb与屈服强度σ0.2与时效前相比没有明显变化,时效超过500h后σb和σ0.2开始显著下降,时效超过1000h后,σb和σ0.2随时效时间延长下降幅度减小;短期时效100h和500h样品在950℃/240MPa条件下的持久寿命大幅度降低,延伸率快速上升,时效时间超过1000h后,持久寿命的下降幅度减小,合金的持久寿命与延伸率均趋于稳定。长期时效后γ'相形貌改变及γ/γ'相界面高密度位错网的破坏是时效后合金室温及高温持久性能持续降低的主要原因。